Sensors, Detectors, Converters

Industrial precision temperature (-50 °C up to 200 °C) sensor probe on 3m long cable with RJ-11 for use with SD-2x1Wire and NB-2x1Wire IoT monitoring units. Manufacturer...

This sensor is specially designed for extremely cold temperatures from -200 °C to +160 °C. Temp 1Wire Pt1000 frost offers high accuracy over a wide temperature range,...

Temp HomeBox is a temperature sensor probe with a standard temperature range (-30 to +70 °C), with RJ11 interface (1-Wire bus) and 3m long Connection cable (RJ11). The sensor...

Temperature sensor probe with 1-Wire UNI output dedicated for monitoring of low and high temperatures (-50°C to +200°C) for use with SD2x1Wire, NB2x1wire and other HW group...

Temperature sensor probe and convertor to 1Wire-Uni bus dedicated for monitoring of very low (cryo) and high temperatures (-190°C to +150°C), for use with SD2x1Wire, NB2x1wire...

Temperature sensor probe (-10°C to +80°C) with calibration certificate in 3 points (-5°C, 25°C and 78°C). The sensor probe on 3 meters long cable with 1-Wire connector...

Temperature sensor (-10°C to +80°C)  with a 1-Wire RJ11 connector and with a metal housing with IP67 protection. Supplied in lengths of 1m, 3m, 10m. It can be...

Temperature sensor (-10°C to +80°C) designated for IT environment, for installation into IT cabinets (racks), for indoor use. Can be daisy-chained, communicating...

Temperature probe -30°C to +60°C (-22°F to +140°F) for outdoor use. The probe in a stainless steel casing is safe for use even in environments such as the pharmaceutical or food...

Digital temperature sensor probe (-50°C to +125°C) designed for outdoor use. Waterproof casing (IP67) made of stainless steel with a 3 meter PVC cable....

Expansion module for connecting another 4 x DI (Digital Inputs) to SD-2x1Wire and NB-2x1Wire IoT monitoring Units. Using the Expander, you can connect door contact, smoke...

Humidity flat sensor probe with RJ-11 (1-Wire) dedicated for indoor use. Humidity probe for use with SD2x1Wire, NB2x1Wire and other HW group monitoring devices, dedicated for...

Current sensor probe with 1-Wire UNI for measuring DC current up to 100A for use with SD-2x 1wire and NB-2x1 wire IoT monitoring units or other HWg monitoring devices. The set...

The combined sensor of Air quality (CO2), Temperature and Humidity in one small body for use with SD-2x1Wire and NB-2x1Wire IoT monitoring units and other HW group devices....

Temperature and Humidity sensor probes in one body. HTemp HomeBox Combines sensor probe with standard temperature range (-30 to +70 °C) and Relative humidity (0-100%)  with...

Combined Temperature (-30°C to +85°C) and Relative Humidity outdoor sensor probe on a 3m long cable dedicated for outdoor use, communicating over the 1-Wire bus. The sensor is...

Combined Temperature (-30°C to +80°C) and Relative Humidity flat sensor dedicated for indoor use. For use with SD2x1Wire, NB2x1 wire IoT Monitoring units.  Combined...

Combined wall mount temperature (-10°C to +80°C) and humidity sensor probe for internal use. Two RJ11 connectors allow daisy-chaining of the sensors and connection to NB2X1Wire...

Universal Water Leak Detector with soak detecting cable (2m long) for use with SD2x1Wire, NB2x1Wire or SD-2xIn, NB-2xIn IoT. Sensing cable detects a small quantity of water or...

Plug-in power detector detects run/failure of the 110/230V voltage and can be connected directly to the wall plug (EU / UK / US). Power detector can be connected to SD-2xIn or...

Power detector and power control in one body with Digital Inputs (DI) and Digital Outputs (DO) . Power Egg can be connected to SD-2xIn, SD-2xOut, NB-2xIN, NB-2xOut. Power Egg...

Water Leak Detector for use with SD2x1Wire, NB2x1Wire or SD-2xIn, NB-2xIn IoT monitoring units.  Sensing cable detects a small quantity of water or other liquid. Soaking...

Flood spot detector on 3m long cable for use with SD-2x1Wire and NB-2x1Wire or other HW group monitoring units dedicated for flood detection, leaking water and other...

The SS14 vibration detector is designed to protect property. It triggers an alarm or alert when shocks and vibrations are detected when trying to break windows, doors, or any...

Water Leak Detection Prolong cable is non-sensitive and is dedicated to cost-effective range extension of WLD sensing cable. Prolong cable can extend WLD cable anywhere, just...

Water Leak Detection cable dedicated for detection even of a very small amount of liquid. 2m / 10m / 50m available.  For universal water and flood detection in any...

Water Leak Detection cable with 2 m long connection cable dedicated for detection even of a very small amount of liquid. Sensing cable in length 2m / 10m / 50m available. ...

Security Door contact is dedicated for door opening detection and for use with SD-2xIN and NB-2xIN or other HWG monitoring devices.  Each set contains 3 detectors....

Security Door contact is dedicated for door opening detection and for use with SD-2xIN and NB-2xIN or other HWG monitoring devices. Door contact on 3m cable triggers an alarm...

Detector for indication of flammable gas presence for use with SD-2xIn and NB-2In IoT monitoring units. Sensor probe detects all types of flammable gasses (natural gas,...

PIR motion detector is designed for property protection and triggers alarm or alert when detects motion in the room. It is ready for use with SD-2xIn, NB-2xIn IoT monitoring...

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization, including red light alarm indicator for use with SD-2xIn and NB-2xIn IoT monitoring units or other...

Isolated DC current sensor for the 1Wire-UNI bus for connecting industrial sensors to monitoring devices. Sensor for measuring currents in the 0–20mA range. It is typically...