Proceed to cart
Customer support:+420 222 511 918
    Home / Sensors, Detectors, Converters / Spot flood detector 1W-UNI

    Spot flood detector 1W-UNI

    Code: 600579
    Not rated
    flooddetector1w uni3m
    €78 €94,38 incl. VAT
    In stock (> 5 pcs)

    Flood spot detector on 3m long cable for use with SD-2x1Wire and NB-2x1Wire or other HW group monitoring units dedicated for flood detection, leaking water and other electrically conductive liquids detection.

    Liquid water detection using four protruding pins on the sensor body. 3m cable can be connected directly to an RJ11 1-Wire UNI port. The sensor can be left lying on the floor (on an electrically insulating surface), or attached to the floor or to a wall. The sensor can be fully submerged.

    Manufacturer website: Flood detector 1W-UNI 

    Detailed information

    Related products

    SD 2x1Wire Unit
    SD-2x1Wire Unit
    In stock (> 5 pcs)
    €203,28 incl. VAT
    €168

    The reliable 1-Wire IoT monitoring unit with Ethernet, Wi-Fi and PoE is dedicated for remote industrial monitoring of temperature, humidity and other variables. Cloud...

    Code: 600695
    NB 2x1Wire Unit
    NB-2x1Wire Unit
    In stock (> 5 pcs)
    €335,65 incl. VAT
    €277,40

    Remote monitoring unit with Narrowband IoT connectivity and internal battery with 1Wire for remote industrial IoT monitoring. Includes a SIM card with 3 years of prepaid service...

    Code: 600774

    Product detailed description

    Water Flood spot detector powered from 1W-UNI interface. Plug as sensor to the RJ11 1W-UNI.
     
    Features: 
    • Connects as an RJ11 sensor to monitoring units.
    • The sensor can be fully submerged.
    • The middle hole facilitates mounting on a wall.

    Package contains:

    • Flood spot detector on 3m long cable

    Environment:

    • Industrial, IT, SOHO
    • Installation: table, wall
    • Protection: IP67

    Sensor Interface:

    • RJ11 (1-Wire)

    Inputs:

    • Wet contact

    Power and dimensions:

    • Power from the 1-Wire UNI bus (RJ11)
    • Power supply: 5V
    • Consumption 10mA
    • Connector: RJ11 (from 1-Wire)

    • Dimensions: 47mm / 37mm / 22mm / 71g

    • Warranty: 24 months

    Additional parameters

    Category: Sensors, Detectors, Converters
    Warranty: 2 years
    Weight: 0.08 kg
    Monitoring: Spot water detection
    Output: RJ11
    ? Monitoring: